Installing and pairing a Teltonika GPS device

Eonsfleet supports Teltonika and CNote GPS hardware. This guide covers a standard hard-wired installation and getting the device to report its first position.

Before you start

• A compatible Teltonika/CNote device with an active SIM.
• The device IMEI (printed on the label).
• Basic tools: fuse taps, crimp connectors, a multimeter.

Wiring

1. 1Connect the red wire to a constant 12/24V supply.
2. 2Connect the black wire to a solid chassis ground.
3. 3Connect the ignition wire to a switched-live source.
4. 4Tuck the GPS antenna where it has a clear view of the sky.

Activate in Eonsfleet

Go to Fleet → Devices → Add Device, enter the IMEI, and save. Assign it to a vehicle. The first fix usually arrives within a few minutes of the ignition being switched on. If nothing appears, confirm the SIM has data and see “Why is my vehicle offline?”.